How to configure remote control for Broadlink or Sonoff

 If you have a device of BroadLink (i.e RM PRO Plus or RM4 Pro etc) or if you havae a Sonoff device and  you can't configure the remote control of these devices then follow this guide.

A few days ago I changed my ADSL line for a FIBER line.
I changed my old router to a new router (with a lot of features).

In the new router I have 2 wifi lines (2.4 GHz and 5GHs).
It is also possible to configure a line for guests (always in 2.4GHz and 5Ghz).

I had only activated a 2.4GHz wifi line and connected my RM4 pro and my Sonoff devices on this wifi line (2.4GHz).

The result is that these devices only work inside my intranet but were not seen remotely.

After reading several forums, contacting broadlink support, sonoff etc i found the solution.

The solution is:

DSL-2750B - Firmware Recovery Mode

If you have a D-Link ADSL Router DSL-2750B with custom firmware (i.e. Infostrada)  you can reset it.

How to Disable Teredo Tunneling Pseudo-interface

To remove Teredo Tunneling Pseudo-interface run the following command:

netsh interface teredo set state disabled

Windows couldn't automatically bind the IP protocol stack to the network adapter

If you can not connect to the internet and ahi the following error message:

"Windows couldn't automatically bind the IP protocol stack to the network adapter"

The solution is the following:

How to disable or enable the wifi of your router

If you want disable or enable the wifi of your router you can run the following commands:

telnet 192.168.1.1

after put your login and password

How to see your ipwebcam from your local network using the DDNS

You suppose that you have activate the DDNS in your Router.

and that the name of your host name is the following:

http://sample.dlinkddns.com

With this url you can access in your router by remote network.

How To Set DDNS in your D-link DSL-2750B

If you want set a dynamic DNS in your new D-link DSL-2750B the steps are the following:

SOLVED – Foscam IP Camera New Password Not Working

Yesterday I was about to go crazy.

I changed the password of my ipwebcam FOSCAM.

After when I have re-authenticate the password did not match.

PANIC !!!!!